Tasks and Prospects for the Development of the Russian Construction Industry

The main requirements for modern housing are accessibility, quality and aesthetics. In construction, new requirements arise for the technology of manufacturing structures: a free layout with a ceiling height of 2.7 m or more; column pitch of 6 m or more; ceiling height of the first floor up to 8 m; a high degree of factory readiness and architectural aesthetics of the exterior walls. At the same time, it is necessary to ensure a reduction in the weight of structures per 1 m² of building area and an increase in installation speed. All these requirements can be fulfilled by the Recon technology, known in the practice of the construction industry in Russia and neighboring countries, which produces pre-stressed floor slabs up to 7.65 m long and unstressed floor slabs up to 7.2 m or more; efficiency structures, internal walls (IW) and external walls (EW) on universal stands 3.6; 4; 5.2 m х 60, 90, 120, 128 m in automatic mode, starting with laying concrete using targeted feeding, automatic vibration of the stand surface, grout of the upper surface and automatic heating of the stand. It is important to note that during the hydration of cement stone, the concrete laid on a universal stand does not move either horizontally or vertically, thereby ensuring high quality and density of the product.

V.A. SHEMBAKOV, Head of GK “REKON-SMK”, General Director of ZAO “Rekon”, RF Honored Builder,Head of the Author ‘s Team for the development and implementation of SMK technology (This email address is being protected from spambots. You need JavaScript enabled to view it.)

ZAO “Rekon” (20a, Dorozhny Proezd, Cheboksary, 428003, Chuvash Republic, Russian Federation)

1. Nikolaev S.V. Construction of panel-monolithic houses from factory-made house kits. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2021. No. 10, pp. 10–16. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2021-10-10-16
2. Sokolov B.S., Zenin S.A. Analysis of the regulatory base for designing reinforced concrete structures. Stroitel’nye Materialy [Construction Materials]. 2018. No. 3, pp. 4–12. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2019-768-3-4-10
3. Nikolaev S.V. Two-layer factory-made exterior panel for low-rise housing construction. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2023. No. 3, pp. 3–10. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2023-3-3-10
4. Rumyantsev E.V. The trends in prefabricated high rise housing construction: world and domestic experience. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2023. No. 3, pp. 13–27. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2023-3-13-27
5. Mikheev D.V., Guryev V.V., Dmitriev A.N., Bachurina S.S., Yakhkind S.I. Development of industrial civil engineering and standard design at the present stage. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2022. No. 7, pp. 41–52. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2022-7-41-52
6. Shembakov V.A. Innovation industrial technology of precast-monolithic frame developed by GC “Rekon-SMK” and used 20 years at the RF market. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2019. No. 3, pp. 33–38. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2019-3-33-38
7. Shembakov V.A. Possibilities of innovative industrial technology of prefabricated monolithic frame GC «Recon-SMK». Zhilishchnoe Stroitel’stvo [Housing Construction]. 2023. No. 3, pp. 32–38. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2023-3-32-38
8. Sokolov N.S. Technology for increasing the bearing capacity of the base. Stroitel’nye Materialy [Construction Materials]. 2019. No. 6, pp. 67–71. (In Russian). DOI: https://doi.org/10.31659/0585-430X-2019-771-6-67-71
9. Shembakov V.A. Current industrial technology for manufacturing non-stressed and pre-stressed structures. Modernization of large-panel prefabrication plants. Zhilishchnoe Stroitel’stvo [Housing Construction]. 2020. No. 3, pp. 30–35. (In Russian). DOI: https://doi.org/10.31659/0044-4472-2020-3-30-35