V.P. MOROZOV2, Doctor of Sciences (Geology and Mineralogy);
A.I. GUMAROV1, Engineer;
K.A. ARISKINA3 , Laboratory Technician;
A.R. VALIMUKHAMETOVA3, Laboratory Technician; O.N. LIS 3, Laboratory Technician;
M.V. PASYNKOV3, Laboratory Technician.
1 Kazan Federal University. Institute of Physics (16a, Kremlyovskaya Street, 420008, Kazan, Russian Federation)
2 Kazan Federal University. Institute of Geology and Petroleum Technologies (4/5, Kremlyovskaya Street, 420008, Kazan, Russian Federation
3 University spin-off «Clinker ceramics of KFU» (18, Kremlyovskaya Street, 420008, Kazan, Russian Federation)
4 OAO «Alekseevskaya Keramika» (10, Kirpichnozavodskaya Street, town settlement Alekseevskoye, Republic of Tatarstan, 422900, Russina Federation)
2. Krasnikov G.Ya., Zaitsev N.A. Sistema kremnii – dioksid kremniya submikronnykh SBIS [The silicon-silicon dioxide system of submicron VLSI]. Moskow: Tekhnosfera, 2003. 384 p.
3. Simonis H. Ceramische Erfahrungen Glasuren Eigenschaften, Fehler und Beseitigungen, besondere Oberflachen 1994. Gruppo Editoriale Faenza Editrice S.p.A. pp. 28–29.
4. Kharybina Yu.V., Pitak O.Ya., Pitak I.V. Development of decorative coatings for facial ceramic products. Vostochno-evropeiskii zhurnal peredovykh tekhnologii. 2013. No 6, pp. 56–58. (In Russia).
5. Zubekhin A.P., Yatsenko N.D., Rat’kova V.P. Angobes based on red-burning low-melting clays. Stroitel’nye materialy [Construction Materials]. 2009. No. 3, pp. 40–41. (In Russia).
6. Kotlyar V.D., Novikova A.S., Terekhina Yu.V. Technology and design of ceramic bricks with a decorative polymer coating with the effect of “ombr”. Inzhenernyi vestnik Dona. Scientific Internet-journal, 2013. No. 4. http://www.iv- don.ru/ru/magazine/archive/n4y2013/2091 (date of access 20.03.2017) (In Russia).
7. Kotlyar V.D., Terekhina Yu.V., Kotlyar A.V. Properties, applications and requirements for clinker bricks. Stroitel’nye materialy [Construction Materials]. 2015. No. 4, pp. 72–74. (In Russia).
8. Gorshkov V.S., Savel’ev V.G., Abakumov A.B. Vyazhushchie, keramika i steklokristallicheskie materialy: Struktura i svoistva [Binders, ceramics and glass-crystalline materials: Structure and properties]: Sprav. Posobie. Moscow: Stroyizdat. 1994. 564 p.
9. Krasnokutskiy Yu.I., Vereshchak V.G. Poluchenie tugoplavkikh soedinenii v plazme [Production of refractory compounds in plasma]. Kiev: Vishcha shkola. 1987. 200 p.
10. Yuryev Y.N., Mikhnevich K.S., Krivobokov V.P., Sidelyov D.V., Kiselyova D.A. The properties of titanium nitride films, obtained by magnetron sputtering. Izvestiya Samarskogo nauchnogo tsentra RAN. 2014. No. 4 (3), pp. 672–676. (In Russia).
11. Gotman I., Gutmanas E.Y., Hunter G. (2011). Wear-resistant ceramic films and coatings, in Ducheyne, P. (ed.), Comprehensive Biomaterials. 2011. Vol. 1, pp. 127–155
For citation: Salakhov A.M., Morozov V.P., Gumarov A.I., Ariskina K.A., Valimukhametova A.R., Lis O.N., Pasynkov M.V. Experience of surface treatment of ceramic materials of construction purpose. Stroitel’nye Materialy [Construction Materials]. 2017. No. 4, pp. 42–46. DOI: https://doi.org/10.31659/0585-430X-2017-747-4-42-46. (In Russian).