Damping Waterproofing Material of “Hydrofor” Series on the Basis of Polyisocyanateurethane

Number of journal: №7-2016
Autors:

L.Yu. MATVEEVA
A.G. SINAYSKIY
E.E. ANDREEVA
A.V. RUMYANTSEVA
P.B. KUKSA

DOI: https://doi.org/10.31659/0585-430X-2016-739-7-63-66
УДК: 678.664:630.824.39

 

AbstractAbout AuthorsReferences
Compositions and main characteristics of promising materials on the basis of elastomeric polyurethanes for waterproofing and arrangement of damping seams and coverings in construction have been developed and determined. Polyisocyanateurethane sealants of “Hydrofor” series represent the compositions of a polyurethane elastomer with chemically grafted isocyanate functional groups, which ensure the good adhesion to concrete and steel, with various fillers. Thanks to the combination of adhesion, strength, and damping properties, these materials are recommended for using in vibration-resistant structures.
L.Yu. MATVEEVA1 , Doctor of Sciences (Engineering) (This email address is being protected from spambots. You need JavaScript enabled to view it.),
A.G. SINAYSKIY1 Candidate of Sciences,
E.E. ANDREEVA1 , Engineer,
A.V. RUMYANTSEVA2 , Engineer;
P.B. KUKSA2 , Candidate of Sciences (Engineering)

1 Institute of Synthetic Rubber (1, Gapsalskaya Stret, 198035, Saint-Petersburg, Russian Federation)
2 Saint-Petersburg State University of Architecture and Civil Engineering (4, 2nd Krasnoarmeiskaya Street, 190005, Saint-Petersburg, Russian Federation)

1. Mikheev V.V. Neizotsianatnye poliuretany [NonIsocyanate polyurethanes.]. Kazan: KNITU (KGTU). 2011. 292 p.
2. Ovchinnikov I.G., Makarov V.N., Ovsyannikov S.V. Antikorrozionnaya zashchita mostovykh sooruzhenii [Corrosion protection of bridge structures]. Saratov: «Nauka». 2007. 192 p.
3. Bolton U. Konstruktsionnye materialy: metally, splavy, polimery, keramika, kompozity. Karmannyi spravochnik [Structural materials: metals, alloys, polymers, ceramics and composites. Pocket Guide]. Moscow: «DodekaXXI», 2004. 315 p.
4. Rait P., Kamming A. Poliuretanovye elastomery / Per. s angl. pod red. N.P. Apukhtinoi [Polyurethane elastomers / Trans. from English. ed. N.P. Apukhtina]. LeningradMoscow: Khimiya. 1973. 304 p.
5. Lipatov Yu.S., Kercha Yu.Yu., Sergeeva L.M. Struktura i svoistva poliuretanov [The structure and properties of polyurethanes]. Kiev: Naukova dumka. 1970. 280 p.
6. Bayer O. Das Di-Isocyanat-Polyadditionsverfahren (Polyurethane). Angewandte Chemie. 1947. Vol. 59. Is. 9, pp. 257–272.
7. Maier-Vestus U. Poliuretany. Pokrytiya, klei i germetiki / Per. s angl. L.N. Mashlyakovskogo, V.A. Burmistrova [Polyurethanes. Coatings, Adhesives & Sealants / Trans. from English L.N. Mashlyakovskiy, V.A. Burmistrov]. Moscow: Pein-Media. 2009. 400 p.
8. Bock M., et al. Globalisierung der Fahrzeugindustrie – eine Herausforderung bei der Lackrohstoffentwicklung. Farbe und Lack, 1996. Vol. 102 (9), pp. 132–140.
9. Bock M., Meiss H.U. Meier-Westhues. Globalisierung aus Sicht eines Lackrohstoffproduzenten. DFO-Automobiltagung. September 1998. Weimar, Berichtsband.
10. The polyurethanes book. Ed. by Randall D., Lee S. Wiley. 2003. 477р.

For citation: 


Print   Email